Sub projects

Fabrication:

• Solder 3.5mm gold connectors onto 4x ESC's (DONE!)
• Replace TX60 connector on power distribution board with 5.5mm gold connector (DONE!)
• Solder uBEC onto the auxiliary connector of the power distribution board (DONE!)
• Attach back lit LCD display on radio transmitter
• Solder wires onto radio transmitter to allow firmware update
• Arrange 3.3v for radio receiver either using another uBEC or a separate battery pack
• Solder wires to attach GPS to flight controller

Finishing touches:

• Calibrate ESC's
• Program ESC's
• Attach items to quad frame