Showing posts with label youtube. Show all posts
Showing posts with label youtube. Show all posts
Friday, 26 December 2014
QAV250 Xmas build a'la banggood.com
Long time no post as usual but this fall hasn't yielded a lot of building worth posting. This however is a complete QAV250 build with most parts from the cheap Chinese online shop banggood.com.
Parts needed are the usual suspects starting with the frame. This is a carbon fiber/plastic frame with a robust X shape for $16.99. Just be careful and use lock-tight to keep screws in place.
This combo package consists of an ESC, a brush-less motor with a 5x3 propeller. The ESC is programmed with a SimonK firmware, which is something to aim for as his firmware usually does a better job than the stock firmware. Motors are 1804-2400kv from ZMR. This package goes for $16.08.
One motor was broken on delivery. It felt like one of the magnets had come loose and I've heard from others that they have had similar problems too. Luckily, I bought one spare package.
As flight controller, I'm using a Naze32 copy called Flip32. It's based on a 32-bit ARM Cortex-M3 processor (STM32F103CB). It can be used with both Baseflight and Cleanflight, which are both open source projects. I'm using Cleanflight as it feels newer and seems to have a more active development. It also has a few more features, such as Autotune. PID configuration can be used right out of the box.
Note: One issue I experienced is how to arm the flight controller. After some research, I figured that you absolutely need to calibrate both magnetometer and accelerator in order to get it to arm. $24.59.
I'm using a generic 1300mAh battery, which is common with QAV250 models. I have had no issues with these batteries so far. $20.45 each, I bought two but I think that I'm going to order a couple more.
Radio receiver is actually bought from Hobby King rather than from banggood, simply because I fancy the OrangeRX brand. It's a seven channel RX with fail-safe functionality. When used properly, if the RX detects a loss or radio connectivity, it'll automatically pull down the throttle channel to a minimum. This will prevent your model from flying away. If you're interested in the "fly away" topic, do query YouTube with the keywords "quadcopter fly away". $17.99.
Merry Christmas and fly safe!
Sunday, 4 August 2013
X550 resurrected
Done a few test flights with the X550 after replacing broken parts and it seem to fly as it should. Haven't tried anything GPS related yet but it spins like a cat and flies like a bird.
This is a short video from one of the first trial flights. The camera vibrates like crazy but you can still make something out after using the stabilizing enhancements thanks to YouTube. Guess I'll need to do something about this in the future.
This is a short video from one of the first trial flights. The camera vibrates like crazy but you can still make something out after using the stabilizing enhancements thanks to YouTube. Guess I'll need to do something about this in the future.
Sunday, 7 July 2013
One motor down..
Yesterday, I started trimming the AltHold function that relies on any altitude sensors. The sensor I have so far been using is the barometer, which is very noisy. That means it's less then perfect at holding it's altitude, but works +/- 1-2 meters.
Today, I thought of doing some more testing, maybe even try the AutoLand function as the AltHold seemed to work. However, after a few minutes of flying this happened..
One of the motors came off upon takeoff and took a piece of the radio antenna with it. The motors are fastened with two screws at the bottom and it seems as it came unscrewed, possibly due to vibrations. This seem to be the case for one other of the motors when I checked them all. It seems as checking the screws before going flying is a bullet on the pre-flight checklist.
Now, I only found one of the screws, which means, I have to get another somehow. Not sure if I should order a whole new frame as spare part or if I should try to find one in a local utility store. I'm going to try the second option tomorrow to see if they have any thing available that would work as a substitute.
Yes, there will be more videos. I have two that I filmed yesterday when doing some trimming but I haven't uploaded them to YouTube yet as my bandwidth is limited and the amount is not unlimited at the moment.
Monday, 24 June 2013
Lady bird flies with a new camera
It works fairly well and records in 720x480 with a pretty narrow angle lens. Having a wide eye lens would however have been ideal for this kind of video recording. There are however other cameras that feature that but not for less than $7.
I'd recommend removing the plastic container by unscrewing a couple of screws to reduce the weight of the camera. This is what I've done to fit it to the ladybird, still it feels like it's pretty overweight at the moment. I fitted the camera using Velcro to make it possible to remove the camera if desired.
This is my first attempt to do any kind of recording so please don't mind the quality :).
You might notice that the date and time annotation is upside down, that is because I had to mount the camera upside down on the Ladybird to be able to access the start/stop buttons. I then used the enhancement features from YouTube to rotate the screen :).
Subscribe to:
Posts (Atom)
