Showing posts with label banggood. Show all posts
Showing posts with label banggood. Show all posts

Thursday, 8 January 2015

LED's to light up your racer


It's always a good idea to put LED lights on your quad. I do it as I always get confused on which is front and back while flying some distance away. These LED lights are actually designed for a different frame, which also is a few bucks more than my shoestring budget QAV250 frame. The colors blue, white, green and red. The support 11V at 3S 14.8V at 4S. This package goes for $1.53 from good old Banggood.
I threaded the wires around the frame and through holes in order to get them away as good as possible as this frame does not contain soldering points and built-in power distribution.



Almost final assembly. I'm going to attach the lights under the frame or facing backwards so that they are visible from below. Not sure yet as attaching facing backwards will be an issue with the battery that also slides in from behind.







Have fun and let there be light!

Friday, 26 December 2014

QAV250 Xmas build a'la banggood.com


Long time no post as usual but this fall hasn't yielded a lot of building worth posting. This however is a complete QAV250 build with most parts from the cheap Chinese online shop banggood.com.
Parts needed are the usual suspects starting with the frame. This is a carbon fiber/plastic frame with a robust X shape for $16.99. Just be careful and use lock-tight to keep screws in place.

This combo package consists of an ESC, a brush-less motor with a 5x3 propeller. The ESC is programmed with a SimonK firmware, which is something to aim for as his firmware usually does a better job than the stock firmware. Motors are 1804-2400kv from ZMR. This package goes for $16.08.

One motor was broken on delivery. It felt like one of the magnets had come loose and I've heard from others that they have had similar problems too. Luckily, I bought one spare package.

As flight controller, I'm using a Naze32 copy called Flip32. It's based on a 32-bit ARM Cortex-M3 processor (STM32F103CB). It can be used with both Baseflight and Cleanflight, which are both open source projects. I'm using Cleanflight as it feels newer and seems to have a more active development. It also has a few more features, such as Autotune. PID configuration can be used right out of the box.
Note: One issue I experienced is how to arm the flight controller. After some research, I figured that you absolutely need to calibrate both magnetometer and accelerator in order to get it to arm. $24.59.
I'm using a generic 1300mAh battery, which is common with QAV250 models. I have had no issues with these batteries so far. $20.45 each, I bought two but I think that I'm going to order a couple more.








Radio receiver is actually bought from Hobby King rather than from banggood, simply because I fancy the OrangeRX brand. It's a seven channel RX with fail-safe functionality. When used properly, if the RX detects a loss or radio connectivity, it'll automatically pull down the throttle channel to a minimum. This will prevent your model from flying away. If you're interested in the "fly away" topic, do query YouTube with the keywords "quadcopter fly away". $17.99.


Merry Christmas and fly safe!

Friday, 31 May 2013

I also need a CP2102?

This is a CP2102. It's used to program the OranteRX radio module. I just realized this morning that I hadn't covered the programming part of the module, and also hadn't ordered one. So, here we are, making additional orders again. This however is very cheap and can be bought from good old Banggood for less than $3 including the free world wide shipping. How the wiring is done is covered in a thread over at rcgroups.com.

There is always something more you need, isn't it? Anyhow, it's Friday and TGIF!